ROCKWHEEL AXIAL (IN-LINE) CUTTER
Rockwheel axial single‐drum cutters are utilized when
traditional twin drum cutters are either too wide or not
properly oriented for the grinding task.
When vertical holes or a narrower cut are required an
axial cutterhead can do the trick. These rock and
concrete cutters have the same power as their twin
drum counterparts but with all the power concentrated
on a single drum, so look out!
A typical application is grinding concrete piles / columns
or any demolition job where vertical cutting is required.
Other applications include grinding holes into rock,
narrow trenching, mixing (when equipped with special
mixing blades), trimming arched profiles, mining and
Two models AX20 (95hp/70kW) and AX30
(150hp/110kW) are available for excavators in the 18‐40
ton class…Let’s get to work!
|Excavator class tons||18 – 25||25 – 35|
|Hydraulic Input Power hp (kW)||95 (70)||150 (110)|
|Required Flow Rate GPM (l/min)||30-55 (150-208)||55-90 (208-340)|
|Operating Pressure max. psi (bar)||5800 (400)||5800 (400)|
|Drum Speed||50 – 75||50 – 80|
|Max Torque ft/lbs (kNm)||13,206 (17.9)||19,715 (26.7)|
|Max Cutting Force lbs (kN)||12,385 (55.1)||17,752 (79)|
|Drum Width *optional in. (mm)||26 (650)||27 (677)|
|Drum Diamter in. (mm)||26 (646)||27 (677)|
|Weight (w/o bracket) lbs (kg)||1995 (885)||2200 (980)|